Professional bare conductor manufacturer from China, Meet your kinds of requirement bare condutor wire ( AAC, AAAC, ACSR, AACSR, TACSR,ACSR/AW, GSW, ACS, OPWG,ADSS etc.) , With over 30 years production experience and 15 years export experience, factory price without any third party. Can be customized your ideal size and on-time delivery.
GSW-Galvanized Steel Wire/Strands
1.The single wires are concentrically stranded and wrapped helically around a central wire.
2.Zinc-coated grade of steel strand wire /guy wire :
Class A ,Class B and class C. Concentrically stranded Galvanized steel wire strand available in class “A”, “B” and “C” galvanizing, “A” being the least heavy and “C” being the most heavy.
ASTM A475, ASTM A363, BS183:1972 and ect.Other International Standard
1.The galvanized steel wire strand is used for overhead ground lines or electrical power transmission lines，Stay or guy wire strands are produced for use with poles, towers, or any other form of guying.
2. Galvanized steel wire strand in multi-core electrical cables. Its low cost and ease of production makes galvanized steel wire ideal for mass produced corrosion resistant wire products，It is an indispensable industrial, agricultural, and DIY fastening and reinforcement standard.
GSW Size Parameter:
|ASTM A475||No./mm: 3/2.64 3/3.05 3/3.05 3/3.30 3/3.68 3/4.19 7/1.04 7/1.32 7/1.57 7/1.65 7/1.83 7/2.03 7/2.36 7/2.64 7/3.05 7/3.68 7/4.19 7/4.78 7/5.26 19/2.54 19/2.87 19/3.18 19/3.81 19/4.50 19/5.08 37/3.63 37/4.09 37/4.55|
|BS 183||No./mm: 3/1.80 3/2.65 3/3.25 3/4.00 4/1.80 4/2.65 4/3.25 4/4.00 5/1.50 5/1.80 5/2.65 5/3.25 5/4.00 7/0.56 7/0.71 7/0.85 7/0.90 7/1.00 7/1.25 7/1.40 7RS＊ 7/1.60 7/1.80 7/2.00 7/2.36 7/2.65 7/3.00 7/3.15 7/3.25 7/3.65 7/4.00 7/4.25 7/4.75 19/1.0 19/1.25 19/1.40 19/1.6 19/2.0 19/2.5 19/3.0 19/3.55 19/4.0 19/4.75|
ACS-Aluminum Clad Steel Wire
Aluminum Clad Steel wire is composed of aluminum clad steel.The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.
ACS similar tensile strength as Guy Wire but has superior corrosion resistance and enables much higher conductivity if needed.
1.good mechanical properties
2.improved electrical characteristics
3.excellent corrosion resistance
4.better Sag properties
The standard ACS-Aluminum Clad Steel Conductor are suitable for Messenger Wire, Overhead Ground or Static Wire, Guy Wire.They are with low resistance and high strength]
ACS Size Parameter:
|ASTM B415||Nominal Dia.(mm): 2.052 2.304 2.589 2.904 3.264 3.477 3.665 3.934 4.115 4.392 4.620 4.775 5.189|
|ASTM B416||3x5AWG 3x6AWG 3x7AWG 3x8AWG 3x9AWG 3x10AWG
7x5AWG 7x6AWG 7x7AWG 7x8AWG 7x9AWG 7x10AWG 7x11AWG 7x12AWG 19x5AWG 19x6AWG 19x7AWG 19x8AWG 19x9AWG 19x10AWG 37x5AWG 37x6AWG 37x7AWG 37x8AWG 37x9AWG 37x10AW
|DIN 48201||sq.mm: 25 35 50 70 95 120 150 185 240 300|
ACAR-Aluminum Conductor Aluminum Alloy Reinforced
Core: Aluminum alloy wires 6201-T81
Outer Layers: Aluminum wires 1350H-19.
Conductor: This bare concentric-lay stranded conductor is made from round aluminum 1350-H19(extra hard) wires and round aluminum-alloy 6201-T81 core wires for use as overhead electrical conductors.
Standard of Production:
1.ASTM B524 Standard, refer to the following specification
B-230 Aluminum Wire 1350-H 19 for Electrical Purpose
B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose
2.IEC 61089 Standard
ACAR cable can be installed in air，Is is recommended that the installation instructions indicated by the local electric code, or any equipment, be followed, so that the safe guarding of persons and the integrity of the product will not be affected by deficiencies in the installation.
ACAR Size Parameter: